BankManager™ Gen3

Please visit the BankManager™ detailed description page before placing an order.

Combine Lithium (LiFePO4) and Lead-Acid Batteries in the same system, and charge everything optimally.

BankManager™ Configuration Options

• All-In-One

The “All-In-One” unit takes all the hookup wires right to the one unit. If you are upgrading from a Gen1 or Gen2 BankManager™ this would be the easiest upgrade as the case has the same footprint as the Gen2 and uses the same hookup wire order as the earlier offerings. This case is the least complex, with everything in one box. This is especially useful for installations that mount the BankManager™ near the batteries, or if the user doesn't mind running several wires to the display unit. 

Dimensions: 2.9"(10cm) x 2.9"(10cm) x 2.1"(5.5cm)with knob and 1.77"(4.5cm without)

This unit includes a sensor and is compatible with the Universal and Generation 3 spare/replacement parts listed below. 

Note: Installation requires an appropriate contactor, sold separately. 

• Surface Mount

The surface-mount unit offers the smallest display unit, and does not require holes to be drilled into your boat. Its ethernet wires come out of the bottom of the display unit. This unit includes a sensor and is compatible with the Universal and Generation 3 spare/replacement parts listed below. 

Dimensions: 2.9"(10cm) x 2.36"(6cm) x 2.1"(5.5cm)with knob and 1.77"(4.5cm without)

Note: Installation requires two ethernet cables (not included) and an appropriate contactor, sold separately.

• Back/Flush Mount

The back-mount unit allows you to hide the wires going to the BankManager™, as all wires enter the unit through the back. It may optionally be flush mounted, similar to other modern boat instruments, and includes a trim ring that helps achieve a professional-looking installation. This unit includes a sensor and is compatible with the Universal and Generation 3 spare/replacement parts listed below. 

Dimensions: 2.9"(10cm) x 2.54"(9cm) x 2.1"(5.5cm)with knob and 1.77"(4.5cm without)

Note: Installation requires two ethernet cables (not included) and an appropriate contactor, sold separately.

BankManager™  Current Sensor

• 200 Amp sensor
• 300 Amp sensor
• 400 Amp sensor
• 500 Amp sensor
• 600 Amp Sensor

200A is adequate for 90% of applications.  If your system moves more than 200A, other current sensors are available.  As the current sensor gets larger, its percision decreases, but even the 600A sensor would work in any system. (You just might see the 10ths-of-amps display jump past some digits.)

If don't use the 200A sensor, you need to tell your BankManager™ what you have installed. You can do this through the menu during setup.

Contactor Options - Add the desired Contactor to your shopping cart

Here is a link to the Contactor https://marinedcac.com/products/bistable-contactor

Download the installation manual here BankManager™ 3.x Manual