BankManager™ Gen2

Combine Lithium (LiFePO4) and Lead-Acid Batteries in the same system, and charge everything optimally.

The unit takes all the hookup wires right to the one unit. If you are upgrading from a Gen1 BankManager™ this would be the easiest upgrade as it has the same footprint as the Gen1 and uses the same hookup wire order as the earlier offering. This case is the least complex, with everything in the one box. This is especially useful for installations that mount the BankManager™ near the batteries, or if the user doesn't mind running several wires to the display unit. 

Note: Installation requires an appropriate contactor, sold separately. 

BankManager™  Current Sensor

Note: Ensure you select the proper amperage to meet your needs

• 200 Amp sensor
• 300 Amp sensor
• 400 Amp sensor
• 500 Amp sensor
• 600 Amp Sensor

Please choose your charging amperage. 200A is adequate for 90% of applications.  If your system moves more then 200A, other current sensors are available.  As the current sensor gets larger, its percision decreases, but even the 600A sensor would work in any system. (You just might see the 10ths-of-amps display jump past some digits.)

If don't use the 200A sensor, you need to tell your BankManager™ what you have installed. You can do this through the menu during setup.

Contactor Options - Add the desired Contactor to your shopping cart

Here is a link to the Contactor https://marinedcac.com/products/bistable-contactor

Download the installation manual here BankManager™ 2.x Manual